| Back |
| Product |
CONCRETE TILE CLEANER |
| Description |
It is pale blend of surfactants and organic acids in aqueous solution. It is a blend of mineral acids, amphoterics, non-ionic surfactants and organic acids. |
| Specifications |
| Form |
Liquid |
| Odour |
Acidic |
| Colour |
Colourless |
| Toxicity |
Toxic |
| Detergency |
Low |
| Foaming |
Low |
| Storage Stability |
1 Year (If kept at 25 degrees C.) |
| Biodegradability |
Biodegradable |
| Emulsification |
Emulsifier |
| Solubility |
Water Soluble |
| Specific Gravity |
1.01 - 1.15 |
| pH |
0.8 - 1.0 |
|
| Where To Use |
It can be used to clean concrete and terrazzo tiled floors to remove mortar, concrete spillages, heavy lime and rust. Will also remove oil and grease from garage and factory floors. |
| Dilution |
May be used as supplied or dilute 1:10 with water. Either spray or brush on. Allow a while to work. If necessary scrub wire brush, rinse off and re-apply. |
| Caution |
Contains acids. DO NOT APPLY TO STAINLESS STEEL, ZINC, GLAVANISED OR ANODISED SURFACES. Avoid prolonged exposure to skin by the use of protective clothing. Accidental splashes should be washed with copious quantity of clean water. DO NOT TAKE INTERNALLY. |
| Handling & Storage |
1. Usual precautions for handling chemicals should be observed
2. Keep in cool dry, well ventilated place
3. Keep away from hazardous chemicals |
| Personal Protection |
Wear suitable protective clothing, gloves and eye/face protection. |
